Selection guide
What this truck can do
Use these figures to plan the job; confirm the final specification and operating limits for the exact build.
11.16 m³ nominal tank
Tank size is not the permitted water load. At roughly 1,000 kg/m³, a full 11.16 m³ of water would weigh about 11,160 kg, exceeding the source-listed 10,165 kg payload before crew or tools.
Check for your job: Obtain the completed vehicle plate and weigh the chosen build; set fill level within payload and axle limits.
12–16 m source-listed spray width
Front and rear spray equipment distributes water across a road strip; actual width and application rate depend on nozzle and pressure settings.
Check for your job: Request a spray-system test or specification for the intended road width and water application rate.
191 kW (259 hp) diesel power
Source-listed engine output for the reference 4×2 chassis; not a measure of spray-pump flow.
Check for your job: Confirm engine and pump specification for the final export build.
Typical applications
Candidate for road washing, construction dust control and landscape watering where a 4×2 road truck can access the site. Suitability in Kenya or Uganda depends on the final steering configuration, road limits and build documents.
Product overview
This two-axle bowser is a candidate for scheduled road cleaning, site dust suppression and landscape watering. The front spray bar, rear sprinklers and water cannon serve different watering positions; a final nozzle and pump specification is needed to establish field coverage.
For procurement in Kenya or Uganda, share the required steering side, route limits, working width and water source. Request a build-specific drawing, vehicle plate, pump data and destination documents before confirming the configuration.
Kenya and Uganda registration, steering-side, road-load and emissions suitability have not been verified for this build.