Selection guide
What this truck can do
Use these figures to plan the job; confirm the final specification and operating limits for the exact build.
CLW9387TDP / four axles
Identifies a gooseneck semi-trailer layout with four axle positions in the basic data.
Check for your job: Confirm axle-group ratings, spacing and completed-trailer plate.
12 tyres / leaf springs
The basic listing describes a twelve-tyre, leaf-spring running gear.
Check for your job: Confirm tyre sizes, suspension type and spare-parts specification.
Two different overall-size entries
Basic and detailed dimensions differ; no single finished size is established.
Check for your job: Obtain the signed drawing for the exact trailer before route or cargo planning.
Typical applications
Heavy equipment, excavator, plant and machinery haulage between project sites.
Product overview
Choose the tractor and trailer as one transport combination. Check fifth-wheel and kingpin compatibility, loaded axle-group weights and route limits, then compare the machine’s full transport dimensions with the usable lowbed deck and ramp arrangement. The supplier listing has conflicting mass and size entries, so a signed drawing and completed-trailer plate are needed before a load plan.
Selection guide
What the published specification means
| Source detail | Buyer implication | Check for your job |
|---|---|---|
| CLW9387TDP / four axles | Identifies a gooseneck semi-trailer layout with four axle positions in the basic data. | Confirm axle-group ratings, spacing and completed-trailer plate. |
| 12 tyres / leaf springs | The basic listing describes a twelve-tyre, leaf-spring running gear. | Confirm tyre sizes, suspension type and spare-parts specification. |
| Two different overall-size entries | Basic and detailed dimensions differ; no single finished size is established. | Obtain the signed drawing for the exact trailer before route or cargo planning. |
Working fit
Where this configuration makes sense
Consider it for
- Plant movement where a compatible tractor and verified loading plan are available.
- Projects that can confirm cargo dimensions, loading method and the full road route before purchase.
Check another option when
- A purchase based only on the advertised tonnage range without a signed weight schedule.
- Routes or sites where bridge, turning or clearance checks have not been completed.
Configuration
Options that change the job
Deck and ramp geometry
Longer or wider decks and different ramps may improve machine fit but change transport dimensions and tare weight.
Request a drawing for the actual excavator or plant model.Axle and suspension package
Different axle groups can change load distribution, service parts and route eligibility.
Confirm axle ratings, kingpin load and the complete combination mass.Buyer questions
Frequently asked questions
What is the rated payload of this semi-trailer?
The source record contains conflicting capacity and mass figures, so this page does not state a single rated payload. Ask for a signed specification and axle-load calculation for the exact build.
Is a tractor unit included?
No tractor inclusion is established by the available product record. Confirm the required tractor, fifth-wheel height and kingpin compatibility in the written quotation.
Will an excavator fit on the deck?
Provide the excavator's operating weight, track width, overall length and loaded height. Deck dimensions, ramp angle and tie-down points must be checked against that machine.
Can it be registered for Kenya or Uganda?
Registration and route eligibility depend on the final configuration and current local requirements. Ask a local agent and the relevant authority to review the documents and axle plan before shipment.
Before committing
Check the exact build
These pages organize supplier listing data for comparison. They do not certify the installed configuration, road eligibility, manufacturer authorization or local service coverage. Request a signed vehicle specification, loading plan, photographs of the proposed unit and applicable documents before payment.
Quotation checklist
Information for an accurate lowbed quote
- Machine make, model, operating weight and dimensions
- Required number of machines per trip
- Tractor model, fifth-wheel height and kingpin specification
- Loading method, ramp angle and ground clearance
- Origin, destination, route and any width or height constraints
- Required quantity, delivery basis and destination country
Use a verified contact channel; this page does not currently provide an online submission form.
Same category
Compare other equipment carriers
Confirm the final axle-group loads, overall dimensions, road registration, permits and route eligibility for the intended Kenya or Uganda movement.