Selection guide
What this truck can do
Use these figures to plan the job; confirm the final specification and operating limits for the exact build.
10,000 kg maximum crane lift
The crane's headline lifting class, not the permitted load on the cargo bed or at maximum reach.
Check for your job: Verify the SQS250-4 load chart at the planned radius, boom angle and outrigger setup.
15.6 m outreach / 17.3 m height
Separate geometric limits for planning placement and clearance; they do not imply full load at those limits.
Check for your job: Check the load chart, ground bearing, overhead clearance and work area.
7,870 kg source-listed cargo payload
The bed's rated transport load is separate from the crane's lifting rating.
Check for your job: Confirm the completed vehicle plate, axle loads and final bed/crane configuration.
7,200 × 2,450 mm reference bed floor
About 17.6 m² nominal floor footprint (7.2 × 2.45 m), before side and equipment clearances.
Check for your job: Confirm final drawing, tie-downs, actual usable space and payload after customisation.
Typical applications
Construction-material delivery, pipe and equipment placement, and contractor site lifting where access, ground support and the final crane load chart suit the job.
Product overview
The crane and cargo bed serve different parts of the same job: the truck brings materials to site, then the boom places a load where the final crane chart allows. The supplier's 10-ton lift figure is a maximum crane rating, not the truck's cargo payload and not the safe load at maximum outreach.
Core capabilities for planning
| Source figure | What it means for the job | What to verify |
|---|---|---|
| 10,000 kg maximum crane lift | The crane's headline lifting class, not the permitted load on the cargo bed or at maximum reach. | Verify the SQS250-4 load chart at the planned radius, boom angle and outrigger setup. |
| 15.6 m outreach / 17.3 m height | Separate geometric limits for planning placement and clearance; they do not imply full load at those limits. | Check the load chart, ground bearing, overhead clearance and work area. |
| 7,870 kg source-listed cargo payload | The bed's rated transport load is separate from the crane's lifting rating. | Confirm the completed vehicle plate, axle loads and final bed/crane configuration. |
| 7,200 × 2,450 mm reference bed floor | About 17.6 m² nominal floor footprint (7.2 × 2.45 m), before side and equipment clearances. | Confirm final drawing, tie-downs, actual usable space and payload after customisation. |
How to use the published ratings
The source lists 15.6 m maximum outreach and 17.3 m maximum lifting height separately. A lift plan needs the load mass, working radius, boom angle, outrigger setup and ground condition. Ask for the SQS250-4 load chart and the finished vehicle plate before committing to a lift or cargo load.
Bed and configuration choices
The reference dropside bed measures 7,200 × 2,450 × 550 mm. Its nominal floor footprint is about 17.6 m² (7.2 × 2.45 m); usable space and legal carrying mass depend on the final body drawing, side structure and vehicle plate. The source marks the bed dimensions as customisable. Confirm the final dimensions, tie-down arrangement and resulting payload before quotation.
Where this truck fits
It is a candidate for moving and placing building materials, pipes and site equipment where access, ground bearing and outrigger space can be checked. Do not select it on the assumption that a 10-ton load can be lifted at 15.6 m. For Kenya or Uganda, confirm right-hand-drive availability, registration documents, axle limits and any destination-specific inspection requirements for the exact build.
Frequently asked questions
Can it lift 10 tonnes at its maximum 15.6 m outreach?
The source gives those as separate maximum figures. It does not establish a 10-ton lift at 15.6 m. Request the SQS250-4 load chart for the required radius and setup.
How much cargo can the bed carry?
The source lists 7,870 kg rated cargo payload for this configuration, separate from the crane's 10,000 kg maximum lift. Confirm the number on the completed vehicle plate after body and crane options are fixed.
Is the 7.2 m bed size fixed?
No. The source describes 7,200 × 2,450 × 550 mm as a customisable reference dimension. Ask for a build-specific drawing and revised payload before ordering a different bed.
Related boom trucks
Compare a Dongfeng 4×2 8-ton straight-boom truck or a Dongfeng 4×4 5-ton knuckle-boom truck. Their chassis, boom type and published lifting classes differ; select only after checking each model’s final load chart, bed payload and destination documents.
Information needed for a quotation
Tell us the heaviest item and its dimensions, required lifting radius and height, cargo weight, site access and ground conditions, destination country, steering-side requirement, quantity and preferred bed dimensions. Price, lead time, warranty and local certification remain to be confirmed in writing.
For Kenya or Uganda, confirm steering-side availability, axle-load limits, registration and applicable inspection requirements for the exact completed vehicle before quotation.